Technical Data
CompareORP / Redox
| Measuring Principle | Sensor ORP / Redox |
| Application | Chemical industry, paper industry, wastewater, industrial water, power plants, refuse incinerators, sugar industry |
| Installation | Retractable holder with ball valve |
| Characteristic | Open and closed tank, piping (min DN80) |
| Design | Manual or pneumatical Manual or pneumatical ball valve Can be fully automated with CPC30 / 300 Integrated rinse chamber with connection G 1/4" or NPT 1/4" |
| Material | Seals: EPDM / FPM / perfluoroelastomer Electrode holder: stainless steel 1.4404 Ball valve: Stainless steel 1.4401, PTFE Inlet safety seal: PVDF, PTFE, Viton® Outlet safety seal: PVDF, Stainless steel 1.4404 Rinse connection socket: Stainless steel 1.4404 |
| Dimension | Immersion depth: 61 to 235mm (2.4 inch to 9.25 inch) |
| Process temperature | PA pressure cylinder (manually only): Max. 80 °C (176 °F) Stainless steel pressure cylinder: up to 100°C (212 °F) with continuous operation up to 6 bar (87 psi) |
| Process pressure | PA pressure cylinder: Max. 6 bar (87 psi) Stainless steel pressure cylinder: Max. 10 bar (145 psi) Pneumatic outlet safety seal: 6 bar at 100 °C (87 psi at 212 °F) |
| Connection | G1¼ internal thread, DN50, DN65, ANSI 2" |
| Certificates, declarations and approvals | 3.1.B EN 10204 |
pH
| Measuring Principle | Potentiometric |
| Application | Chemical industry, paper industry, wastewater, industrial water, power plants, refuse incinerators, sugar industry |
| Installation | Retractable assembly with ball valve |
| Characteristic | Open and closed tank, piping (min DN80) |
| Design | Manual or pneumatical Manual or pneumatical ball valve Can be fully automated with CPC30 / 300 Integrated rinse chamber with connection G 1/4" or NPT 1/4" |
| Material | Seals: EPDM / FPM / perfluoroelastomer Electrode holder: stainless steel 1.4404 Ball valve: Stainless steel 1.4401, PTFE Inlet safety seal: PVDF, PTFE, Viton® Outlet safety seal: PVDF, Stainless steel 1.4404 Rinse connection socket: Stainless steel 1.4404 |
| Dimension | Immersion depth: 61 to 235mm (2.4 inch to 9.25 inch) |
| Process temperature | PA pressure cylinder (manually only): Max. 80 °C (176 °F) Stainless steel pressure cylinder: up to 100°C (212 °F) with continuous operation up to 6 bar (87 psi) |
| Process pressure | PA pressure cylinder: Max. 6 bar (87 psi) Stainless steel pressure cylinder: Max. 10 bar (145 psi) Pneumatic outlet safety seal: 6 bar at 100 °C (87 psi at 212 °F) |
| Connection | G1¼ internal thread, DN50, DN65, ANSI 2" |
| Certificates, declarations and approvals | 3.1. acc. to EN 10204 |
Product Overview
The Cleanfit CPA473 retractable assembly is designed for applications with fibrous media. The patented sleeve seal and built-in wiper ensure that the sensor remains free of buildup. The Cleanfit offers maximum operating convenience: sensors can be replaced, and the assembly even serviced, while the process is running. Optional electric or pneumatic control systems ensure automatic cleaning and calibration even under demanding process conditions.
-
Benefits
-
Safe and reliable isolation from the process under virtually all operating conditions
-
In-service maintenance of the assembly: the entire assembly body can be removed through a sealed ball valve (e.g. for replacing sealing rings, electrode holder supports, etc.)
-
Fully automatic operation even under different process conditions
-
Easy installation: all hoses of the assembly with pneumatic ball valve are pre-connected
-
Application areas
-
Chemical industry
-
Paper industry
-
Wastewater/industrial water
-
Power plants
-
Waste incineration plants
Spare Parts & Accessories 58
58 spare parts · click to collapse
| Order code | Description | |
|---|---|---|
| 51512677 | heat-shrinkable tube | Details |
| 51512678 | Electrode guide | Details |
| 51503774 | CPA471/472 PA Cylinder BodyKIT CPA471/472 cylinder PA long | Details |
| 71042130 | CPA471/472 PA Cylinder Body | Details |
| 71329949 | CPA47X Spare Parts: Check Valve | Details |
| 51503776 | CPA471 stainless steel bodyKIT CPA471 cylinder SS long | Details |
| 71042134 | CPA471/472 Cylinder Body | Details |
| 51512689 | CPA473 cleaning chamber | Details |
| 71082107 | CPA47: Mating flange | Details |
| 71329946 | CPA473/474 spare parts: rinse nozzle G1/8-G1/4 | Details |
| 71329947 | KIT CPA473/474: Rinse nozzle G1/8-NPT1/4 | Details |
| 51511929 | Pneumatic Outlet Valve PortOutlet valve pneumatic CPA473 G1/4" | Details |
| 51511934 | Pneumatic Outlet Valve PortOutlet valve pneumatic CPA473 NPT1/4" | Details |
| 71240620 | CPA47x drain valve: Viton O-ring | Details |
| 51511937 | Pneumatic Outlet Valve PortOutlet valve manual CPA473/474 G1/4" | Details |
| 51511938 | Pneumatic Outlet Valve PortOutlet valve manual CPA473/474 NPT1/4" | Details |
| 51511939 | check valveCheck valve CPA473/474 G1/4" | Details |
| 51511940 | check valveCheck valve CPA473/474 NPT1/4" | Details |
| 51512698 | ball valve | Details |
| 51512707 | CPA473 Wind-driven | Details |
Configurator / Comparison
Source: public information from the Endress+Hauser website
Manuals & Documents 6
All documents for this model6 documents · click to expand
Operating Instructions Cleanfit P CPA473 English
技术资料 Cleanfit P CPA473 Chinese
Technical Information Topcal S CPC310 English
Technical Information Retractable assembly Cleanfit P CPA473 English
Technical Information Topcal S CPC310 English
Technical Information Retractable assembly CleanFit P CPA 473 English
Case Studies
Municipal Wastewater Treatment · brackets — Application Case
Customer Profile
The typical setting in Municipal Wastewater Treatment is the inlet, biological and outlet stages of a municipal plant. The measuring point is brackets; the focus is mounting, fixation and position adjustment for instruments.
Key Difficulties
Conditions are high solids and corrosive fractions, with large diurnal flow swings and, on top of that, effluent parameters drift and probes foul with sludge and biofilm, which a standard configuration cannot handle for long. The design therefore starts with checking structural strength by material, corrosion class and load.
Implementation
The scope ran through the system components range: supplying as a full cabinet and signal-chain configuration. Technically it hinges on checking structural strength by material, corrosion class and load, and on these requirements: stable compliance with Grade 1A discharge limits and online data reporting.
Customer Benefit
In practice this means accurate mounting positions that remove measurement bias at the source, which cut the workload on the site maintenance team.
Food & Beverage · brackets — Application Case
Project Background
The project covers dosing, pasteurising, filling and CIP stages. The work centres on brackets and the core task is mounting, fixation and position adjustment for instruments.
Operating Challenges
The medium and duty are characterised by syrups, dairy and beverages that scale easily, under strict hygienic requirements, and frequent cleaning demands instruments that withstand hot CIP/SIP caustic cycles. So brackets cannot be specified generically — it calls for checking structural strength by material, corrosion class and load.
Solution
The Ainstru engineering team worked through the system components range: supplying as a full cabinet and signal-chain configuration. The configuration involves checking structural strength by material, corrosion class and load, with these requirements in view: food-safety and hygienic design per 3-A / EHEDG.
Results
Since start-up the system has run steadily; the practical result is accurate mounting positions that remove measurement bias at the source.
Chemical & Pharmaceutical · brackets — Application Case
Project Overview
The site is reactors, metering vessels and finished-product tanks. The customer wanted brackets properly configured on the existing plant, with the aim of mounting, fixation and position adjustment for instruments.
Technical Challenges
What actually causes trouble is highly corrosive media with solvents and crystallisation, partly in explosive atmospheres, and corrosion plus Ex protection shortens instrument life and makes downtime costly. All of this means the brackets configuration has to involve checking structural strength by material, corrosion class and load.
Configuration
Supply and installation were organised through the system components range: supplying as a full cabinet and signal-chain configuration. On site this meant checking structural strength by material, corrosion class and load, checked line by line against: Ex certification and GMP traceability of records.
Performance
After commissioning the outcome is accurate mounting positions that remove measurement bias at the source, and the readings are now used for process tuning.
Power & Energy · brackets — Application Case
Site Conditions
This is a Power & Energy customer whose plant is at boiler feedwater, turbine condensate and FGD/DeNOx systems. The main task was mounting, fixation and position adjustment for instruments.
The Problem
The difficulty lies in high temperature and pressure with both steam and saline water; at the same time drift under high temperature and pressure, with very costly unplanned outages. Specification therefore means checking structural strength by material, corrosion class and load.
What We Did
We took a system components range approach — supplying as a full cabinet and signal-chain configuration. Delivery was built around checking structural strength by material, corrosion class and load, with point-by-point checks on: compliance with power-industry codes and unit availability targets.
Operating Outcome
In service the system performs as intended — accurate mounting positions that remove measurement bias at the source, with routine maintenance falling noticeably.
Related Products
Endress+HauserEcofit CPA640 pH holder with adapter set
Endress+HauserFlowfit W CPA250 flow-through holder
Endress+HauserCleanfit W CPA450
Endress+HauserFlowfit P CPA240
Endress+HauserCleanfit CPA871
Endress+HauserDipfit P CPA140
Endress+HauserFLEXDIP CYA112
Endress+Hauser