Technical Data
CompareTemperature transmitters
| Measuring Principle | |
| Input | 1 x Pt100 |
| Output | 1 x analog 4...20 mA |
| Auxiliary power supply | 10...35 V DC |
| Communication | pc-programmable |
| Installation | Terminal head form B |
| Accuracy | Pt100, -200...650 °C (-328...1.202 °F) <= 0.2K / 0.08% span Pt100, -50...250 °C (-58...482 °F) <= 0.1 K /0.08% span Pt100, -50...250 °C (-58...482 °F) <= 0.2 K /0.08% span |
| Galvanic isolation | no |
| Certification | Marine approval UL according to 3111-1 UL EX NI, IS GOST Metrology CSA General Purpose FM NI, Class I, Div. 2, Group ABCD CSA NI, Class I, Div.2, Group ABCD FM/CSA NI, Class I, Div. 2, Group ABCD GL (German Lloyd) |
Designed specifically for transmitting resistance thermometer (RTD) Pt100 sensor signals, with configurable measuring ranges. The standard 4 ... 20 mA current output signal is used for process measurement. It can be used in various non-hazardous areas, providing fast, convenient and economical temperature measurement with reliable, accurate measured values.
Advantages
High-precision measurement over the entire ambient temperature range
Fault signal on sensor open circuit or short circuit, with preset values in accordance with NAMUR NE 43
Electromagnetic compatibility (EMC) in accordance with NAMUR NE 21, CE approval
Online setup during measurement using the SETUP connector
User-configurable range setting
Marine approval
Component certified in accordance with UL 3111-1
Spare Parts & Accessories 8
8 spare parts · click to collapse
| Order code | Description | |
|---|---|---|
| 51001112 | temperature transmitter spare parts(4 screws, 6 springs, 10 spring rings) | Details |
| 71528231 | DIN rail mounting accessoryClip according to IEC 60715 for temperature head transmitters. Packing unit: 2 pieces | Details |
| READWIN- | Readwin 2000 Commissioning Package READWINReadwin 2000 Operation + Read. software | Enquire |
| TXU10- | Instrument Commissioning Kit TXU10用于可以PC编程调试的设备 程序设置+用于带USB接口的PC的连接线 | Enquire |
| TAF10- | Remote junction box TAF10Application: E+H Head transmitter Housing: Alu IP66, 100x100x60mm. | Enquire |
| TMT31- | F+ Temperature transmitter TMT312-wire temperature transmitter. Single sensor input. Application: RTD/TC. Factory setup w/o additional specification: Pt100, 4-wire, 0...+100oC, presetting failure current low. Consider additional marine certificate requirements on application side. | Enquire |
| 71044061 | equipment package2x screws, 2x springs, 2x spring rings, 1x sealing CDI-connector | Details |
| 71044062 | equipment package2x screws, 1x sealing CDI-connector | Details |
Configurator / Comparison
Accessories / Spare parts
Source:Endress+Hauserpublic information from the website
Measuring principle video
Click to playManuals & Documents 11
All documents for this model11 documents · click to expand
Operating Manuals ReadWin 2000 (GB) English
Operating Manuals ReadWin 2000 (GB) English
BA163R Operating Instructions for TMT 180 Version 07.03 English
ReadWin® Quick Setup English
BA163R Operating Instructions for TMT 180 Version 07.03 English
iTEMP TMT180 Chinese
技术资料 iTEMP® TMT180 Chinese
技术资料 iTEMP® Pt TMT180 Chinese
iTEMP TMT180 English
iTEMP® TMT180 Technical Information English
Technical information iTEMP Pt TMT180 English
Case Studies
Municipal Wastewater Treatment · Temperature transmitter — Application Case
Site Conditions
This is a Municipal Wastewater Treatment customer whose plant is at the inlet, biological and outlet stages of a municipal plant. The main task was converting RTD or thermocouple signals into a standard current output.
The Problem
The difficulty lies in high solids and corrosive fractions, with large diurnal flow swings; at the same time effluent parameters drift and probes foul with sludge and biofilm. Specification therefore means choosing integral or remote versions by ambient, Ex zone and mounting.
What We Did
We took a temperature range approach — temperature solution matched to measuring point and response needs. Delivery was built around choosing integral or remote versions by ambient, Ex zone and mounting, with point-by-point checks on: stable compliance with Grade 1A discharge limits and online data reporting.
Operating Outcome
In service the system performs as intended — better noise immunity and much smaller transmission error, with routine maintenance falling noticeably.
Food & Beverage · Temperature transmitter — Application Case
Application Context
dosing, pasteurising, filling and CIP stages is a typical Food & Beverage duty. The project started from Temperature transmitter, focusing on converting RTD or thermocouple signals into a standard current output.
Process Constraints
frequent cleaning demands instruments that withstand hot CIP/SIP caustic cycles, and syrups, dairy and beverages that scale easily, under strict hygienic requirements only amplify it. The Temperature transmitter specification must therefore cover choosing integral or remote versions by ambient, Ex zone and mounting.
Delivery Approach
Delivery was handled as the temperature range — temperature solution matched to measuring point and response needs. Execution centred on choosing integral or remote versions by ambient, Ex zone and mounting, together with food-safety and hygienic design per 3-A / EHEDG.
Field Results
Operation shows the benefit clearly — better noise immunity and much smaller transmission error, with confidence in this measuring point improving markedly.
Chemical & Pharmaceutical · Temperature transmitter — Application Case
Customer Profile
The typical setting in Chemical & Pharmaceutical is reactors, metering vessels and finished-product tanks. The measuring point is Temperature transmitter; the focus is converting RTD or thermocouple signals into a standard current output.
Key Difficulties
Conditions are highly corrosive media with solvents and crystallisation, partly in explosive atmospheres and, on top of that, corrosion plus Ex protection shortens instrument life and makes downtime costly, which a standard configuration cannot handle for long. The design therefore starts with choosing integral or remote versions by ambient, Ex zone and mounting.
Implementation
The scope ran through the temperature range: temperature solution matched to measuring point and response needs. Technically it hinges on choosing integral or remote versions by ambient, Ex zone and mounting, and on these requirements: Ex certification and GMP traceability of records.
Customer Benefit
In practice this means better noise immunity and much smaller transmission error, which cut the workload on the site maintenance team.
Power & Energy · Temperature transmitter — Application Case
Project Background
The project covers boiler feedwater, turbine condensate and FGD/DeNOx systems. The work centres on Temperature transmitter and the core task is converting RTD or thermocouple signals into a standard current output.
Operating Challenges
The medium and duty are characterised by high temperature and pressure with both steam and saline water, and drift under high temperature and pressure, with very costly unplanned outages. So Temperature transmitter cannot be specified generically — it calls for choosing integral or remote versions by ambient, Ex zone and mounting.
Solution
The Ainstru engineering team worked through the temperature range: temperature solution matched to measuring point and response needs. The configuration involves choosing integral or remote versions by ambient, Ex zone and mounting, with these requirements in view: compliance with power-industry codes and unit availability targets.
Results
Since start-up the system has run steadily; the practical result is better noise immunity and much smaller transmission error.
Related Products
Endress+HauseriTEMP TMT72, Transmitter HART
Endress+HauseriTEMP TMT182, Head Transmitter HART
Endress+HauseriTEMP TMT82, Transmitter HART
Endress+HauseriTEMP TMT71, Transmitter 4-20mA
Endress+HauseriTEMP TMT80, Head Transmitter
Endress+HauseriTEMP TMT31, Transmitter 4-20mA
Endress+HauseriTEMP TMT142, Field Transmitter HART
Endress+Hauser