Instrumentation · Engineering · Package · PLC
0755-82221901 sales@ainstru.com

PS11 Compact radar level transmitter

PS11 Compact radar level transmitter
Compact radar level transmitter
VEGA PS11
Configurable Models 12 models
Compact radar level instrument for continuous level measurement, for simple measuring tasks, plastic housing IP66/IP67, type 4X
Compare

Measurement

Measuring range up to 10 m (32.81 ft)
Deviation ≤ 5 mm
Beam angle 8°
Measuring frequency W-band (80 GHz technology)

Electrical & communication

Output signal 4 … 20 mA
Bluetooth standard Bluetooth 5.0
Bluetooth range Typically 25 m (82 ft)
Operating voltage 12 … 35 V DC
Protection rating IP66/IP67, according to IEC 60529; type 4X, according to UL 50

Process conditions

Process fitting Thread G1½, 1½ NPT, R1½
Process pressure -1 … 3 bar (-100 … 200 kPa/- 14.5 … 43.51 psig)
Process temperature -40 … +60 ℃ (-40 … +140 ℉)
Ambient temperature -40 … +60 ℃ (-40 … +140 ℉)

Application area

The VEGAPULS 11 is the ideal radar sensor for non-contact levelmeasurement in easy applications in a number of industrial plants.It is particularly suitable for level measurement in water treatment,storage tanks with acids and lyes, additives in all industrial areas, or formeasuring levels through a plastic tank or IBC container.The sensor is suitable both for measuring liquids and for use on smallbulk solids silos or bulk solids containers.

Your benefit

  • Maintenance-free operation due to non-contact 80 GHz radar tech­
  • nology
  • Exact measurement results independent of medium properties and
  • process conditions
  • High plant availability because wear and maintenance-free. Mainte­
  • nance-free operation due to non-contact measuring principle

Function

The device emits a continuous radar signal through its antenna whichis modulated in its frequency. The emitted signal is reflected by themedium and received by the antenna as an echo.The frequency difference between the emitted and received signalis proportional to the distance and depends on the filling height. Thedetermined filling height is converted into a respective output signal andoutput as measured value.

12 models · click to collapse
Municipal Wastewater Treatment

Municipal Wastewater Treatment · radar — Application Case

Project Overview

The site is the inlet, biological and outlet stages of a municipal plant. The customer wanted radar properly configured on the existing plant, with the aim of continuous radar level measurement of liquids and solids.

Technical Challenges

What actually causes trouble is high solids and corrosive fractions, with large diurnal flow swings, and effluent parameters drift and probes foul with sludge and biofilm. All of this means the radar configuration has to involve choosing antenna type by dielectric constant, range and process connection.

Configuration

Supply and installation were organised through the level range: level solution matched to the actual tank and silo geometry. On site this meant choosing antenna type by dielectric constant, range and process connection, checked line by line against: stable compliance with Grade 1A discharge limits and online data reporting.

Performance

After commissioning the outcome is reliable under heavy dust and vapour, reducing manual dipping, and the readings are now used for process tuning.

Food & Beverage

Food & Beverage · radar — Application Case

Site Conditions

This is a Food & Beverage customer whose plant is at dosing, pasteurising, filling and CIP stages. The main task was continuous radar level measurement of liquids and solids.

The Problem

The difficulty lies in syrups, dairy and beverages that scale easily, under strict hygienic requirements; at the same time frequent cleaning demands instruments that withstand hot CIP/SIP caustic cycles. Specification therefore means choosing antenna type by dielectric constant, range and process connection.

What We Did

We took a level range approach — level solution matched to the actual tank and silo geometry. Delivery was built around choosing antenna type by dielectric constant, range and process connection, with point-by-point checks on: food-safety and hygienic design per 3-A / EHEDG.

Operating Outcome

In service the system performs as intended — reliable under heavy dust and vapour, reducing manual dipping, with routine maintenance falling noticeably.

Chemical & Pharmaceutical

Chemical & Pharmaceutical · radar — Application Case

Application Context

reactors, metering vessels and finished-product tanks is a typical Chemical & Pharmaceutical duty. The project started from radar , focusing on continuous radar level measurement of liquids and solids.

Process Constraints

corrosion plus Ex protection shortens instrument life and makes downtime costly, and highly corrosive media with solvents and crystallisation, partly in explosive atmospheres only amplify it. The radar specification must therefore cover choosing antenna type by dielectric constant, range and process connection.

Delivery Approach

Delivery was handled as the level range — level solution matched to the actual tank and silo geometry. Execution centred on choosing antenna type by dielectric constant, range and process connection, together with Ex certification and GMP traceability of records.

Field Results

Operation shows the benefit clearly — reliable under heavy dust and vapour, reducing manual dipping, with confidence in this measuring point improving markedly.

Power & Energy

Power & Energy · radar — Application Case

Customer Profile

The typical setting in Power & Energy is boiler feedwater, turbine condensate and FGD/DeNOx systems. The measuring point is radar ; the focus is continuous radar level measurement of liquids and solids.

Key Difficulties

Conditions are high temperature and pressure with both steam and saline water and, on top of that, drift under high temperature and pressure, with very costly unplanned outages, which a standard configuration cannot handle for long. The design therefore starts with choosing antenna type by dielectric constant, range and process connection.

Implementation

The scope ran through the level range: level solution matched to the actual tank and silo geometry. Technically it hinges on choosing antenna type by dielectric constant, range and process connection, and on these requirements: compliance with power-industry codes and unit availability targets.

Customer Benefit

In practice this means reliable under heavy dust and vapour, reducing manual dipping, which cut the workload on the site maintenance team.