Instrumentation · Engineering · Package · PLC
0755-82221901 sales@ainstru.com

PSA23 VEGAPULS Air 23

PSA23 VEGAPULS Air 23
VEGAPULS Air 23
VEGA PSA23
Configurable Models 1 models
Automatic continuous level measurement in plastic vessels, automatic sensor transmitting measured values via radio technology
Compare

Measurement

Measuring span Up to 3 m (9.842 ft)
Deviation ≤ 5 mm

Process conditions

Process temperature -20 … +60 ℃ (-4 … +140 ℉)
Ambient, storage and transport temperature -20 … +60 °C (-4 … +140 °F) Radio technology NB-IoT (LTE-Cat-NB1), LTE-M (LTE-CAT-M1), LoRa WAN

Electrical & communication

Protection rating IP66/IP68 (0.2 bar)/IP69 according to IEC 60529, type 6X, according to NEMA

Application area

The VEGAPULS Air 23 is the ideal sensor for level measurement in IBCand plastic vessels. The device measures through the closed vessel topand is suitable for almost all liquids and bulk solids.The VEGAPULS Air 23 is quickly installed by simple and secure adhe­sive, ceiling or tension belt mounting. As no additional power supply isrequired, the autarkic sensor offers a particularly economical solution.The sensor housing with high protection rating IP69 enables mainte­nance-free continuous operation even outdoors or when cleaning thecontainer.

Your benefit

  • Easy installation thanks to autarkic power supply and radio technol­
  • ogy
  • Exact measuring results independent of product, process and ambi­
  • ent conditions
  • Maintenance-free operation due to non-contact 80 GHz radar tech­
  • nology

Function

The sensor emits a radar signal through the antenna. The emitted sig­nal is reflected by the medium and received as an echo by the antenna.The resulting level is converted into a respective output signal and wire­lessly transmitted.Measured value transmissionDepending on the availability of the radio networks, the device transmitsits measured values wirelessly to an LTE-M (LTE-CAT-M1) or NB-IoT(LTE-CAT-NB1) mobile radio or a plant-side LoRaWAN network.The transmission or evaluation is carried out via an Asset ManagementSystem, e.g. VEGA Inventory System.

1 models · click to collapse
Municipal Wastewater Treatment

Municipal Wastewater Treatment · radar — Application Case

Project Overview

The site is the inlet, biological and outlet stages of a municipal plant. The customer wanted radar properly configured on the existing plant, with the aim of continuous radar level measurement of liquids and solids.

Technical Challenges

What actually causes trouble is high solids and corrosive fractions, with large diurnal flow swings, and effluent parameters drift and probes foul with sludge and biofilm. All of this means the radar configuration has to involve choosing antenna type by dielectric constant, range and process connection.

Configuration

Supply and installation were organised through the level range: level solution matched to the actual tank and silo geometry. On site this meant choosing antenna type by dielectric constant, range and process connection, checked line by line against: stable compliance with Grade 1A discharge limits and online data reporting.

Performance

After commissioning the outcome is reliable under heavy dust and vapour, reducing manual dipping, and the readings are now used for process tuning.

Food & Beverage

Food & Beverage · radar — Application Case

Site Conditions

This is a Food & Beverage customer whose plant is at dosing, pasteurising, filling and CIP stages. The main task was continuous radar level measurement of liquids and solids.

The Problem

The difficulty lies in syrups, dairy and beverages that scale easily, under strict hygienic requirements; at the same time frequent cleaning demands instruments that withstand hot CIP/SIP caustic cycles. Specification therefore means choosing antenna type by dielectric constant, range and process connection.

What We Did

We took a level range approach — level solution matched to the actual tank and silo geometry. Delivery was built around choosing antenna type by dielectric constant, range and process connection, with point-by-point checks on: food-safety and hygienic design per 3-A / EHEDG.

Operating Outcome

In service the system performs as intended — reliable under heavy dust and vapour, reducing manual dipping, with routine maintenance falling noticeably.

Chemical & Pharmaceutical

Chemical & Pharmaceutical · radar — Application Case

Application Context

reactors, metering vessels and finished-product tanks is a typical Chemical & Pharmaceutical duty. The project started from radar , focusing on continuous radar level measurement of liquids and solids.

Process Constraints

corrosion plus Ex protection shortens instrument life and makes downtime costly, and highly corrosive media with solvents and crystallisation, partly in explosive atmospheres only amplify it. The radar specification must therefore cover choosing antenna type by dielectric constant, range and process connection.

Delivery Approach

Delivery was handled as the level range — level solution matched to the actual tank and silo geometry. Execution centred on choosing antenna type by dielectric constant, range and process connection, together with Ex certification and GMP traceability of records.

Field Results

Operation shows the benefit clearly — reliable under heavy dust and vapour, reducing manual dipping, with confidence in this measuring point improving markedly.

Power & Energy

Power & Energy · radar — Application Case

Customer Profile

The typical setting in Power & Energy is boiler feedwater, turbine condensate and FGD/DeNOx systems. The measuring point is radar ; the focus is continuous radar level measurement of liquids and solids.

Key Difficulties

Conditions are high temperature and pressure with both steam and saline water and, on top of that, drift under high temperature and pressure, with very costly unplanned outages, which a standard configuration cannot handle for long. The design therefore starts with choosing antenna type by dielectric constant, range and process connection.

Implementation

The scope ran through the level range: level solution matched to the actual tank and silo geometry. Technically it hinges on choosing antenna type by dielectric constant, range and process connection, and on these requirements: compliance with power-industry codes and unit availability targets.

Customer Benefit

In practice this means reliable under heavy dust and vapour, reducing manual dipping, which cut the workload on the site maintenance team.