EZ7300 Online ATP analyzer

 Measuring method:

The EZ7300 Online Adenosine Triphosphate ATP Analyzer uses luciferin and luciferase to determine adenosine triphosphate (ATP) through a chemiluminescence reaction, in accordance with ASTM D4012-81 standard method.

Instrument features:

• 1) The EZ7300 Online Adenosine Triphosphate ATP Analyzer complies with ASTM 4012-81 standard method

• 2) Simultaneously detects different ATP components in water and analyzes the total ATP content

• 3) Unlike the plate count method, it is not affected by culture medium composition, making ATP detection more accurate

• 4) The EZ7300 Online Adenosine Triphosphate ATP Analyzer enables automated, intelligent analysis with low ATP detection cost

• 5) Easy reagent replacement and automatic system self-cleaning result in low maintenance cost for the ATP analyzer

• 6) The EZ7300 Online Adenosine Triphosphate ATP Analyzer supports multi-stream analysis (up to 8 channels)

Technical specifications

• Measuring parameter    Adenosine triphosphate (ATP)

• Measuring method    Uses luciferin and luciferase to determine adenosine triphosphate (ATP) through a chemiluminescence reaction, in accordance with ASTM D4012-81 standard method

• Measuring range    0.5 - 200 pg/mL ATP

• Detection limit    ≤0.05 pg/mL(0.1pM) ATP

• Accuracy    ≤4% F.S. (using standard solution)

• Measuring interval    7-10 minutes (including sample digestion)

• Verification    Automatic verification, frequency configurable

• Calibration    Automatic 2-point calibration, frequency configurable

• Operating temperature    10℃ - 30℃±4℃，relative humidity: 5%-95% (non-condensing)

• Reagent requirements    During use: 4℃ - 8℃, store away from light

• For long-term storage: -20℃, store in a dark environment

• Flow rate    100-300ml/min

• Sample temperature    10℃ - 30℃

• Power supply requirements    (220±20) VAC/50 Hz (factory default configuration); or (115±5) VAC/60 Hz (manual switching required);

• Analog output    4-20 mA, maximum 500 ohm load, 1 analog output as standard, up to 8 (optional)

• Digital output    Optional: RS232, Modbus (TCP/IP, RS485)

• Sample requirements    Maximum particle size 100μm, <0.1 g / L; turbidity <50 NTU

• Certifications    Complies with CE / UL certification

• Enclosure protection    Analyzer main unit: IP55;

• PC panel: IP65

• Dimensions    690mmx 465mmx 330mm

• Shipping weight    30kg

Ordering guide

• EZ7300.99001102    EZ7300 ATP analyzer, standard measuring range: 0.5-200 pg/mL, 1 channel, 1 x 0/4-20mA output

• EZ7300.99001E02    EZ7300 ATP analyzer, standard measuring range: 0.5-200 pg/mL, 1 channel, 1 x 0/4-20mA output + Modbus RS485

Source: Public information from HACH water quality website