应用行业：
SP510水硬度检测仪可用于软化器出水、锅炉水质的硬度监测；准确的控制软化器在有需要的时候进行再生，延长水质软化保持时间，减少再生成本。
仪器特点：
● 硬度过高时，系统发出报警信号，同时激活软水器启动再生程序。
● 运营水质软化系统，更加合理、经济、有效。
● SP510水硬度检测仪具有自动校准功能。
● 此水质硬度检测仪能“实时”连续监测，测量周期2分钟左右。
● 一套试剂可以供水硬度检测仪连续运行2个月。
● 性价比高，适合系统闭路反控。
● 维护工作量小，仅需要每6个月更换一次泵管。
可选定的监测报警点： 0.3、1、2、5、10、20、50、和 100mg/L 可选
精确度： 0.3～2mg/L 时，设定值的± 10%
5～100mg/L 时，设定值的± 4%
测量周期： 平均 2分钟左右
报警输出： 1 个SPDT 继电器
电源要求： 115/230VAC,50/60Hz，可选
方法认证： UL 和 CSA 标准，CE 认证
备件
| 备件货号 | 仪器型号 | 中文描述 | 英文描述 |
|---|---|---|---|
| 4694200 | SP510水质硬度在线监测仪 | 内嵌2口瓶盖 | CAP，INSERT 2PORT FOR .062TBG |
| 5410100 | SP510水质硬度在线监测仪 | 压板螺丝 | Thumb Screw |
| 5410500 | SP510水质硬度在线监测仪 | 凸轮/联接器组件 | Cam Assy |
| 5411300 | SP510水质硬度在线监测仪 | 光电监测器 | Photo Detector |
| 5411900 | SP510水质硬度在线监测仪 | 电机 | Motor Assembly，SP510 |
| 5516000 | SP510水质硬度在线监测仪 | 主板 | Circuit Board Assembly，SP510 |
| 5516200 | SP510水质硬度在线监测仪 | 比色池模块 | Colorimeter Flowcell Assembly |
| 5516500 | SP510水质硬度在线监测仪 | 维护组件 | Maintenance Kit，sp510 |
订购指南
选购SP510硬度监测仪时注意，不同的试剂决定不同的 测量范围。
SP510 硬度监测仪，标准配置包括：主机、两个月使用的试剂、安装组件、操作手册。
仪器订货号 报警点
54100-03 0.3mg/L
54100-01 1mg/L
54100-02 2mg/L
54100-05 5mg/L
54100-10 10mg/L
54100-20 20mg/L
54100-50 50mg/L
54100-99 100mg/L
来源:哈希水质网站公开信息
Case Studies
Municipal Wastewater Treatment — Wastewater Treatment Plant · HACH-ONLINE Application Case
Project Background
Municipal Wastewater Treatment customers at the Wastewater Treatment Plant stage have long faced the challenge of insufficient accuracy in effluent quality monitoring and instruments prone to contamination causing data drift, affecting compliance discharge, placing higher demands on the stability and measurement accuracy of HACH-ONLINE.
Solution
Based on the on-site conditions, the Ainstru technical team selected suitable HACH-ONLINE for the customer and delivered one-stop service covering selection, installation, commissioning and tuning.
Results
- Measurement accuracy and response speed significantly improved, with stable and reliable data;
- Instruments adapt to complex Municipal Wastewater Treatment conditions, greatly reducing maintenance;
- Helping customers achieve continuous online monitoring and cost reduction, highly recognized by customers.
Food & Beverage — Food Production Line · HACH-ONLINE Application Case
Project Background
Food & Beverage customers at the Food Production Line stage have long faced the challenge of high hygienic measurement requirements, with inline instruments needing to withstand CIP/SIP cleaning while maintaining stable accuracy, placing higher demands on the stability and measurement accuracy of HACH-ONLINE.
Solution
Based on the on-site conditions, the Ainstru technical team selected suitable HACH-ONLINE for the customer and delivered one-stop service covering selection, installation, commissioning and tuning.
Results
- Measurement accuracy and response speed significantly improved, with stable and reliable data;
- Instruments adapt to complex Food & Beverage conditions, greatly reducing maintenance;
- Helping customers achieve continuous online monitoring and cost reduction, highly recognized by customers.
Chemical & Pharmaceutical — Reactors and Storage Tanks · HACH-ONLINE Application Case
Project Background
Chemical & Pharmaceutical customers at the Reactors and Storage Tanks stage have long faced the challenge of highly corrosive media and complex conditions, requiring corrosion-resistant and explosion-proof instruments, placing higher demands on the stability and measurement accuracy of HACH-ONLINE.
Solution
Based on the on-site conditions, the Ainstru technical team selected suitable HACH-ONLINE for the customer and delivered one-stop service covering selection, installation, commissioning and tuning.
Results
- Measurement accuracy and response speed significantly improved, with stable and reliable data;
- Instruments adapt to complex Chemical & Pharmaceutical conditions, greatly reducing maintenance;
- Helping customers achieve continuous online monitoring and cost reduction, highly recognized by customers.
Power & Energy — Power Plant Boiler and Turbine · HACH-ONLINE Application Case
Project Background
Power & Energy customers at the Power Plant Boiler and Turbine stage have long faced the challenge of unstable measurement under high temperature and pressure, with high maintenance and downtime costs, placing higher demands on the stability and measurement accuracy of HACH-ONLINE.
Solution
Based on the on-site conditions, the Ainstru technical team selected suitable HACH-ONLINE for the customer and delivered one-stop service covering selection, installation, commissioning and tuning.
Results
- Measurement accuracy and response speed significantly improved, with stable and reliable data;
- Instruments adapt to complex Power & Energy conditions, greatly reducing maintenance;
- Helping customers achieve continuous online monitoring and cost reduction, highly recognized by customers.
